Hurry up! Sale Ends in
dayshoursminssecsChina Factory 2500W Lithium Battery Portable UPS Power Station Power Bank Generator For Home Outdoor Camping
Specs of LANPWR S2500 2500W Portable Power Station | |||
Item | Standards | Max | Remark |
Battery Type | 45AH | --- | LiFePO4,14 series 3 parallel single 15AH |
Rated Voltage | 44.8V | --- | 14s |
Battery Capacity | 2016WH | --- | Depends on the capacity of a single cell |
Rated Output Power | 2500W | ||
Input Voltage Range | 100V | 110V | |
Input Frequency Range | 50HZ | 63HZ | Under frequency stop charging |
Input Surge Current | 20A | ||
Constant Charging Power | 1300W | 1500W | |
Charging Power Switching | 1300W | ||
Charging Cut-off Power | 70W | ||
UPS Mode | Load <2000W long-term work | UPS mode load load < 2000W, long-term work, and continuous 100W charging, switching time 10MS | |
EPS Mode | Load <2500W long-term work | EPS mode load load < 2500W long-term work, total input ≤ 1500W. When the load power is 1000W, the charging power is 500W |
|
USB-A Output | USB-A QC3.0 *3: 5V, 3.37A; 9V,2.00A; 12V,1.5A |
18W Max per port | |
USB-C Output | PD100W*3: 5V,3A; 9V,3A; 12V,3A; 15V,3A; 20V, 5A |
100W Max per port | |
PPS output voltage range | 20V | ||
Car Charging | Support | 12V charging current is 10A, over 15V, charging current is 20A | |
MPPT Solar Charging | Support | Supports up to 700W solar charging | |
Output Waveform | Pure Sine Wave | Rated resistive load | |
AC Charging and Discharging | Support | ||
Overload Protection | 2650W | 2700W | When the output is overloaded, it will work for about 5 seconds, and the buzzer will stop to prompt a continuous alarm sound and the screen will display |
50 seconds automatic shutdown | |||
Fan on Temperature | 60℃ | 65℃ | After the temperature of the heat sink reaches this range, turn on the fan and the screen will display |
Fan off Temperature | 45℃ | 50℃ | After the heat sink temperature reaches this range, turn off the fan |
Charging Power Error | 5% | 7% | The error is too large and needs to be controlled within 3% |
Discharge Power Error |
5% |
LANPWR 400W Portable Solar Panel
Specs of 400W Portable Solar Panel | |||
Peak Power(Pm) | 400W | ||
Solar Cell Lamination | PET | ||
Cell Efficiency | 22.30% | ||
Voltage at Max Power(Vmp) | 18 | ||
Current at Max Power(Imp) | 19.4 | ||
Open Circuit voltage(voc) | 21.6 | ||
Short Circuit Current(1sc) | 21.38 | ||
Operating Temperature | -20C to 60℃ | ||
Best Working Temperature | 25℃ | ||
Folding Number | 8 | ||
Dimension(unfolded) | 42.0*94.1*1.0 in (106.8*239.0*2.4cm) | ||
Dimension(folded) | 55*53cm | ||
Weight | 9kg | ||
Warranty | 12 month |
A: Working time = 2016Wh* 0.89 / operating wattage of your device
For reference, assuming power consumption of your device is 60W (might be a laptop), working time will be 2016wh*0.89/60w≈29.9hrs (rough calculated) .
Tips: Actual power consumption varies from different usages, please consult LANPWR for better purchase decision.
LANPWR S2500 2500W has built-in EPS function, direct charging from mains, plug and play, say goodbye to adapters, and can be fully charged in 1.6 hours.
A: Yes, you can use the LANPWR S2500 2500W to charge devices, while it's being re-charged at the same time.
A: The LANPWR S2500 2500W is not waterproof. Please do not store them in humid environment for longtime.
A: If the battery is to be unused for a long time (more than 3 months), it should be maintained at 60-80% of the rated capacity (it's recommended to check and charge every 3 months). Store it in a dry and cool place with temperature range between 0 ℃~40 ℃, and humidity 0%~60%. Avoid contact with corrosive substances, and far from fifire and heat sources.
5 ways to charge flexibly, LANPWR S2500 2500W support mains/car charger/generator/smart generator/solar panel charging.