$1,289.00 $729.00SAVE $560.00
Never get caught in the dark
Stay powered on quicker than a blinkof an eye. When used as an emergency powersource during a
blackout, LANPWR kicks in automatically and provides you with power in lessthan 30 milliseconds
Power almost anything
Appliances that
No.
|
Item
|
Functional Decription
|
1
|
DC ON/OFF Switch
|
Turn on DC function,DC Output
|
2
|
Power Button
|
Click second to power on and Screen light up
|
3
|
Phone wireless charge switch
|
Turn On the wireless charge to charge phone
|
4
|
Wireless cell phone charging pad
|
15W wireless cell phone pad charging
|
5
|
AC outlets protection
|
Slides up to open the AC outlet cover,
|
6
|
AC Outlet
|
12V AC Outlet,it can match Chinese,USA,Japan and European multiple standards .three pure sine wave AC outlets
|
7
|
AC ON/OFF Switch
|
Turn on AC function,AC Output 1200W
|
8
|
TYPE-C Output Ports
|
2 ports/ PD65W
|
9
|
Display Screen
|
Instructions follow the display screen
|
10
|
DC Car Port
|
12V(Max 100W Output)
|
11
|
USB Output Ports
|
5V 2.4A / 1 Port, QC3.0 /2 Ports
|
12
|
USB ON/OFF Switch
|
Turn on USB function
|
13
|
Solar Charge Port
|
XT60F(Port)Solar charging input( support 26V-40V)
|
14
|
Fuse
|
Protector(15A overload protection)
|
15
|
AC Quick Wall Outlet
|
Insert AC power line , Charge time:2.5hrs
|
No.
|
LED Screen Displays
|
Function Profile
|
1
|
Input Power
|
Display input wattage
|
2
|
Cooling System Display
|
Display cooling system operation
|
3
|
Output Power
|
Display output wattage
|
4/5
|
Hertz Display
|
50Hz(Click“POWER”Switch +AC Switch 3 seconds to Swtich Frenquency autermatic)
|
6
|
Wireless Charge Display
|
Display the status of wireless charging
|
7
|
Battery Percentage
|
100% battery input
|
8
|
Alarm Display
|
Disply the malfunction and lightflash warning
|
9
|
Power Input Display
|
Flashing while power charging
|
10
|
DC ON/OFF Display
|
Display the status of DC switch operation
|
11
|
USB ON/OFF Display
|
Display the status of USB port operation
|
12
|
AC ON/OFF Display
|
Display the status of AC switch operation
|
A: Working time = 1050Wh* 0.89 / operating wattage of your device
For reference, assuming power consumption of your device is 60W (might be a laptop), working time will be 1050Wh*0.89/60w≈15.5hrs (rough calculated) .
Tips: Actual power consumption varies from different usages, please consult LANPWR for better purchase decision.
A: Plug the power cord into the AC charging input port of the host power supply, or connect the solar panel to the XT60 port, the battery display grid on the display flashes from left to right, and when all 10 grids are on and the battery percentage shows 100%, it means the LANPWR LP1200 is fully charged electricity.
A: Please note that the AC output ports can only charge/power devices that operate at less than 1200 watts, besides, the whole wattage should be under 1200 watts as well . Once exceeding, the LANPWR LP1200 will shut off automatically. Please refer to your device specification before purchase.
A: Yes, you can use the LANPWR LP1200 to charge devices, while it's being re-charged at the same time.
A: The LANPWR LP1200 is not waterproof. Please do not store them in humid environment for longtime.
A: The maximum input wattage of LANPWR LP1200 is 650W(26~40V). As for the charging time, the solar charging time is determined by the photovoltaic, and it takes about 8 hours to fully charge. The charging time may vary due to location, temperature, weather, etc., and the actual time may vary.
A: Plug the power cord into the AC charging input port of the host power supply, or connect the solar panel to the XT60 port, the battery display grid on the display flashes from left to right, and when all 10 grids are on and the battery percentage shows 100%, it means the LANPWR LP1200 is fully charged electricity.