$719.00 $499.00SAVE $220.00
Suitable for various scenarios
Suitable for outdoor electricity, RV electricity, solar charging, all-round consideration for you, making your life more convenient.
Main specifications and parameters of the product
|
||||||
Charging input
voltage and current
|
Output voltage and current
|
|||||
AC 100/240V/5 A
|
The solar energy DC20V/5A
|
AC 100 v / 110 v / 220 v 60/50 hz to 630 + 10 w
|
USB DC 5 v / 2.4 A
|
QC3.0 18W
|
TYPE-C 65W
|
OUT PUT 12V/8A
|
Batteries capacity
|
Product size
|
The product weight
|
AC 100/240V The charging time
|
AC 110V 60Hz/50Hz 600W discharge duration
|
||
153600 MAh
|
275*170*215 mm
|
5.1 Kg (net weight)
|
About 7 h
|
About 55 minutes
|
A: Please note that the AC output port can only charge/power devices that operate at less than 500-Watt. Once exceeding, the LANPWR S600 will shut off automatically. Please refer to your device specification before purchase.
A: Working time = 568Wh* 0.89 / operating wattage of your device
For reference, assuming power consumption of your device is 60W (might be a laptop), working time will be 568Wh*0.89/60w≈8.42hrs (rough calculated) .
Tips: Actual power consumption varies from different usages, please consult LANPWR for better purchase decision.
A: Please note that the AC output ports can only charge/power devices that operate at less than 600 watts, besides, the whole wattage should be under 600 watts as well . Once exceeding, the LANPWR S600 will shut off automatically. Please refer to your device specification before purchase.
A: Yes, you can use the LANPWR S600 to charge devices, while it's being re-charged at the same time.
A: The LANPWR S600 is not waterproof. Please do not store them in humid environment for longtime.
A: Within 7.5 hours from an AC wall outlet. Also supports solar panel charging for your convenience, can use 100W solar panel (Sold Separately) to charge, solar recharging time varies depending on location, temperature, weather, etc. Therefore, the actual recharge time may be different.
A: Plug the power cord into the AC charging input port of the host power supply, or connect the solar panel to the solar charge port, the battery display grid on the display flashes from left to right, and when all 10 grids are on and the battery percentage shows 100%, it means the LANPWR S600 is fully charged electricity.